Deluxe double sliding door corner round shower cubicle 12000 Aqua series shower cubicle $1,385.00 – $1,455.00
Single door square shower cubicle 3000 Aqua series shower cubicle $1,215.00 – $1,355.00

11000 Aqua series shower cubicle

$1,215.00 – $1,355.00

Click here for shipping charges

Aeros 11000 Aqua series shower cubicle
Double sliding door corner round shower cubicle
Dimensions can be found in tabs below

  • Place your order before 9.30am for same day dispatch
Guaranteed Safe Checkout

Double sliding door corner round shower cubicle
11000 Aqua series shower cubicle
$1,215.00 – $1,355.00
Call Back Form

11000 Aqua series shower cubicle

The 11000 Aqua series shower double sliding door round free-standing shower cubicle.

Requires NO silicon, NO glue, and NO screws for assembly.

A unique click lock system insures a fully 100% watertight shower.

Whether it’s a 2nd shower, something for the man cave, shed, or laundry

Double sliding door corner round shower cubicle
Aeros 11000 accessories
Aeros 11000 accessories

Features

  • WELS approved hand shower & 20cm rainfall showerhead
  • Adjustable height rainfall shower arm 
  • Australian approved Watermark mixer w/ BONUS Watermark approved hoses
  • Internal sliding doors
  • Aluminum basket
  • ASNZS2208 Australian standard glass
  • Quick-release door rollers
  • Bonus wall mounts to stabilize the shower to the wall.
  • Non-slip shower base
  • Waste plug
  • Number of screws for frame assembly, “NONE”
  • Door handles
  • Magnetic door strips
  • *Not shown – front double sliding door round shower section included

Accessories

The accessories attach to the rear glass panels, holes are pre-drilled for your convenience.

The Left and right rear walls are reversible, the wall with the basket can also be flipped so the basket can be down low for easy access for kids and the elderly.

The walls are clipped together, with NO screws, NO silicon, and NO glue required for assembly.

The shower tray has multiple adjustable legs below to level the shower.

Designed with a lip around the top edge to stop any water from leaking onto the floor.

Rainfall shower arm & shower heads

The rainfall shower arm is adjustable in height.

It can be lowered to the height of the frame (2090mm) or raised to its maximum height (2290mm) from the floor.

The shower arm holds the rainfall showerhead and 3-function hand shower, to select between the two there is a diverter at the bottom of the rail.

The shower arm, rainfall showerhead, and hand shower conform to Australian Watermark Standards and WELS compliance.

WELS registration: S14515, Flow rate: 9.0L/m, Star rating: 3

Rainfall shower arm
Rainfall shower arm, shower head, hand shower
Push button top wheel
Top door rollers

Wheels

High-quality stainless steel wheels.

Designed for easy cleaning and maintenance.

The bottom wheels have a button to press that will release them from the track.

Remove the door from the top track and clean and maintain wheels and tracks

Push button bottom wheel
Bottom door rollers

Single aluminum basket

Included is a single basket to store your shampoo, conditioner, and soaps, made from aluminum it will not rust.

Kids can’t reach the basket? flip the wall so the basket is down low, ideal for the elderly also.

Aluminium basket
Aluminum basket
Watermark approved Mixer
Mixer diverter

Mixer

Our showers come with Australian standard Watermark-approved mixer diverters.

11000 aqua series shower tested and certified to meet ALL Australian requirements.

Easy access to cartridge for the mixer at the front of the handle, no need to remove shower to replace the cartridge.

Waste plug

Included is a Waste plug that has been designed to be used on our showers.

The horizontal outlet allows for easy connection to existing plumbing.

Have an existing hole in the floor? the waste plug supplied can easily attach or go through a wall if required

You can also rotate the waste plug so the waste pipe does not go through a bearer under the house.

You attach the waste plug with a screw from inside the shower, There is no need to get underneath to tighten a lock nut.

Australian standard 50mm waste plug
Waste plug

Setup guide for Aeros round models

Here you will find a basic guide on how to assemble our round double sliding door shower series.

NOTE: this is for frame assembly only, assembly of parts and accessories can be found on its respective model page…

Assembly procedure for shower frame and base 

Aeros shower round model assembly Step 1

Step 1

Round double sliding door shower model
Aeros shower round model assembly Step 2

Step 2

Shower tray assembly.

Level the shower tray feet below the base and connect it to your waste pipe.
Aeros shower round model assembly Step 3

Step 3

Attach accessories to the rear panel and connect water supply hoses to your water mains,

Test for any leaks on the hoses behind
Aeros shower round model assembly Step 4

Step 4

Attach any accessories if the wall has them included

Lock the side rear wall to the middle panel and rotate until it locks into position

The bottom of the rear wall aluminium will slide under the aluminium on the base to lock into position
Aeros shower round model assembly Step 5

Step 5

Attach any accessories if the wall has them included

Lock the 2nd rear wall to the middle panel and rotate until it locks into position

The bottom of the rear wall aluminium will slide under the aluminium on the base to lock into position
Aeros shower round model assembly Step 6

Step 6

Place one of the curved rails at the front of the shower tray with the flat side down.
Aeros shower round model assembly Step 7

Step 7

Lock the front fixed glass to the rear side wall and rotate until it locks into position

Slide the fixed glass panel down the rear side so the cut-out on the front glass aluminium slides over the block on the curved rail.

Place the glass panel behind the block on the curved rail to lock into position
Aeros shower round model assembly Step 8

Step 8

Slide the top curved rail so the block slides into the slot of the front fixed glass aluminium

Lock the glass panels behind the blocks on the curved rail
Aeros shower round model assembly Step 9

Step 9

Slide the locking blocks on each corner of the curved rail to lock the curved rails to the frame
Aeros shower round model assembly Step 10

Step 10

  1. Top wheels are for adjusting the level and height of the doors, the screw below the wheel is what is used to raise and lower the door panel
  2. Bottom wheels are the push button for quick release, by pushing the button you lower the wheel so it goes under the track, by releasing the button the wheel will spring back up into the track
  3. Attach the magnetic door strips and trim to length
  4. Attach the door handles
Aeros shower round model assembly Step 11

Step 11

  1. Hang the top wheels on the top curved rail
  2. Insert the bottom wheels into the bottom curved rail by pushing buttons
  3. If the bottom wheels do not spring back up into the curved rail, or the door is not level, adjust the top wheel from the screw below the wheel
Aeros shower round model assembly Step 12

Step 12

Attach water splash strips to the front fixed glass and inside section of the door.

Trim any excess splash strip

The shower comes with optional wall mounts. To use them attach one edge to the side of the walls that are against your bathroom wall and the other edge to the bathroom wall.

Reviews

There are no reviews yet.

Only logged in customers who have purchased this product may leave a review.

SKU: 11000 series Categories: , Tags: , , , , ,

Related products