Is the 13000 Aqua Series Deluxe Front-Entry Shower Right for Your Bathroom?
13000 Series buyers guide: the 13000 Aqua Series shower cubicle is a deluxe, fully enclosed square corner shower with front entry. It combines a reinforced acrylic shower tray, opaque aqua rear panels, clear safety-glass panels, a white powder-coated aluminium frame and a single internal sliding front door in one coordinated enclosure.
Often called a shower pod in Australia, this model is designed for renovators, DIY-focused buyers, landlords, builders, granny-flat projects and second bathrooms that need a complete enclosure without a conventional tiled shower area. It provides rainfall, hand-shower, waterfall-spout and back-jet functions, plus internal storage and support fittings.
This 13000 Series buyers guide explains the two external sizes, the square corner-shower layout, included components, plumbing preparation, installation clearances, freight and the difference between the deluxe 13000 and basic 3000. Current price, stock and ordering remain on the separate shop product page.
13000 Series buyers guide: fully enclosed shower cubicle overview
A fully enclosed shower cubicle brings the tray, wall panels, doors and shower fittings together as a model-specific package. Unlike a conventional open shower area, the enclosure does not rely on tiled bathroom walls to form its internal shower surfaces. This can reduce grout cleaning and simplify planning where a complete shower solution is preferred.
The Aeros clip-lock enclosure assembles without silicone, glue or screws. “100% silicone-free” refers to the approved enclosure assembly. Licensed plumbing connections still require compliant materials and methods. The cubicle can stand independently once correctly assembled and connected, can be dismantled later if required, and optional wall mounts are available where the installation calls for them.
The 13000 Series buyers guide describes the product as watertight when correctly assembled and installed. It is not a claim that the surrounding room or building is waterproof.
13000 Series buyers guide: quick specifications
| Specification | 13000 Aqua Series |
|---|---|
| Layout | Square corner shower with front entry |
| External sizes | 13090: 900 × 900 mm; 13100: 1000 × 1000 mm |
| Door | Single internal sliding front door |
| Glass | 5 mm Australian Standard safety glass |
| Frame | White powder-coated aluminium |
| Rear panels | Opaque Aqua panels; remaining panels clear |
| Base | Reinforced non-slip acrylic tray with steel support frame and adjustable levelling legs |
| Height | Adjustable rainfall arm gives approximately 2150–2290 mm; minimum installation height 2150 mm |
| Base entry height | 220 mm |
| Waste | 50 mm horizontal waste plug; waste position 260 × 260 mm |
| Maximum pressure | 500 kPa |
| WELS | S14515; 9.0 L/min; 3 stars |
| Safety-glass licence | CSI Licence 7671 |
Who the 13000 Series buyers guide is for
The 13000 Aqua Series shower cubicle suits buyers who want a deluxe model with multiple water functions and a square footprint. The front entry is useful where one side sits near a vanity, toilet or wall while the front remains accessible. Because the door slides inside the enclosure, it does not swing outward into the bathroom.
The 13000 Series buyers guide is useful when you want two square sizes, a rainfall shower, hand shower, waterfall spout, four brass back jets, internal storage and a grab bar in one coordinated model. It can suit renovations, ensuites, rental upgrades, modular buildings, granny flats and additional shower areas, provided the room, plumbing, drainage and delivery route meet the requirements below.
13000 Series buyers guide: choosing 13090 or 13100
The model number identifies the nominal external footprint. These are the outside measurements of the complete shower, not the internal standing area. Use this 13000 Series buyers guide to compare the two options before ordering.
13090 — 900 × 900 mm
The 13090 uses 0.81 m² of external floor area and is the better starting point where conserving bathroom space is important.
13100 — 1000 × 1000 mm
The 13100 uses 1.00 m² of external floor area. It provides approximately 23% more external floor area than the 13090 and may suit buyers who value more internal showering room.
Measure the proposed position at several points. Check the front entry, nearby doors, vanities, toilets, skirting, wall projections and the working space needed during assembly. Do not select the size only from an old tray measurement or scale dimensions from a website image.
Square corner-shower layout and sliding door
The 13000 is correctly described as a square corner shower with front entry and as having a square corner-shower layout. It is not a corner-entry model: the user enters through the front. This distinction is highlighted in the 13000 Series buyers guide to help buyers choose the correct layout.
The single sliding door moves within the shower footprint, helping preserve clear bathroom floor space. Door hardware includes a twin-post door handle and spring-loaded quick-release bottom door rollers. The quick-release lower rollers assist with access for cleaning while keeping the door correctly located during normal operation.
The door and wall configuration is reversible where supported by the model-specific assembly instructions. Confirm the planned orientation before plumbing and final assembly.
13000 Series buyers guide: shower functions and inclusions
The 13000 Series buyers guide confirms that the deluxe 13000 includes the following coordinated components:
- WaterMark three-way mixer/diverter with front-access mixer cartridge.
- Adjustable rainfall shower arm with a separate 2-way diverter.
- Rainfall shower head.
- Hand shower rail with adjustable soap dish and hand shower holder.
- Three-function push-button hand shower and hand-shower hose.
- Waterfall spout.
- Four brass back jets.
- Two baskets and two shampoo dispensers.
- Internal grab bar.
- Internal plumbing hoses connecting the shower’s supplied plumbing components.
The combined hand shower rail, adjustable soap dish and hand shower holder is one complete part. The hand-shower hose is also included. Neither should be confused with the separate external hoses required to connect the premises’ water supply.
Rainfall shower, hand shower, waterfall spout and back jets
The 13000 provides four distinct shower outlets: an overhead rainfall shower head, a three-function push-button hand shower, a waterfall spout and four brass back jets.
The separate rainfall-arm 2-way diverter switches between the rainfall shower head and hand shower. The WaterMark three-way mixer/diverter selects the rainfall-shower circuit, waterfall spout or back jets.
Accessories, baskets and internal storage
The 13000 includes two baskets and two shampoo dispensers for organising commonly used shower products. Its internal grab bar provides an additional fitted support point, while the hand-shower rail includes an adjustable soap dish and hand-shower holder as one complete combined part. These fittings are supplied as part of the confirmed deluxe inclusions.
13000 Series buyers guide: how the two diverters work
The 13000 Series buyers guide explains two different diverter controls, each performing a separate job.
The adjustable rainfall shower arm includes a 2-way diverter that switches between the rainfall shower head and hand shower.
The three-way mixer/diverter selects between rainfall shower arm, waterfall spout and back jets.
In practical use, the three-way mixer/diverter first directs water to the rainfall-arm circuit, waterfall spout or four brass back jets. When the rainfall-arm circuit is selected, the separate 2-way diverter on the adjustable arm chooses whether water comes from the overhead rainfall shower head or the hand shower.
The four brass back jets are positioned to direct water towards the lower back while the user is seated or positioned appropriately. Water pressure and the property’s plumbing conditions influence the feel of every outlet; the shower’s maximum operating pressure is 500 kPa.
Construction, safety glass and Aqua panels
The enclosure uses 5 mm Australian Standard safety glass in a white powder-coated aluminium frame. Opaque aqua-coloured rear panels form the background behind the fittings, while the remaining panels are clear. The safety glass is covered by CSI Licence 7671.
Safety glass is drilled and prepared before tempering during manufacture. Tempered glass must never be drilled, cut or modified on site. Installers must use only the factory-prepared holes and model-specific components.
The unique Aeros clip-lock system joins the enclosure without screws, glue or silicone. This supports easier assembly and allows the enclosure to be dismantled later if required. Optional wall mounts can be used where appropriate to the installation.
Reinforced base, levelling and entry height
The non-slip acrylic shower tray is reinforced by a steel base-support frame and adjustable levelling legs. These components operate together as the supported base assembly. The legs allow the tray to be levelled on a suitable floor before the enclosure is completed.
The base entry height is 220 mm. Buyers should consider this step when planning access and suitability. The shower can be freestanding after correct assembly and connection, but it still requires a suitable load-bearing floor, safe working clearances and compliant water and waste connections.
Water supply preparation: included and not included
Included: internal plumbing hoses that connect the supplied plumbing parts on the shower and carry water within the shower assembly. The included hand-shower hose connects the hand shower to its shower fitting. These internal hoses are part of the cubicle’s coordinated plumbing components.
Required but not included: two mini stops and suitable external stainless-steel braided supply hoses. These external hoses connect the premises’ hot and cold water supply at the mini stops to the shower’s water inlets. They are different from the included internal plumbing hoses.
The preferred water-supply height is approximately 2150 mm where practical for the installation. The mini-stop positions and external hose routing must remain accessible and must be planned with the installer. A licensed plumber must complete the water-supply connections and confirm compliance with local requirements.
WaterMark, WELS and operating pressure
WaterMark identifies plumbing and drainage products that have been certified for use under the Australian plumbing product certification scheme where applicable. On the 13000, the three-way mixer/diverter is a WaterMark component.
The hand-shower water-efficiency information is WELS registration S14515, with a flow rate of 9.0 litres per minute and a three-star rating. Australian Government WELS information allows buyers to compare registered water-using products on a consistent basis.
The maximum operating pressure is 500 kPa. The property’s plumbing should be checked before connection, and pressure reduction must be arranged where required.
Waste position, drainage and macerator compatibility
The 13000 includes a 50 mm horizontal waste plug. The confirmed waste position is 260 × 260 mm for both sizes. The connection can be accessed from inside the shower, helping the installer connect or remove the waste fitting without treating the cubicle as a permanently bonded tiled enclosure.
A compatible macerator may be considered where a normal gravity-drainage route is unavailable. Macerator selection, pipework, falls, traps, discharge requirements and compliance must be assessed for the specific property by an appropriately qualified installer. Do not order solely on the assumption that every drainage layout will suit.
13000 Series buyers guide: height and installation planning
The adjustable rainfall shower arm gives the completed shower an approximate height range of 2150–2290 mm. The minimum installation height is 2150 mm, but extra working clearance may be needed during assembly and adjustment.
Use the 13000 Series buyers guide to plan the complete external footprint, clear front-door access, plumbing routes, waste route, service access and safe movement around nearby fixtures. Measure at the exact shower position and check sloping ceilings, bulkheads, beams, lights, fans and other overhead obstructions.
Follow only the current 13000 Aqua Series assembly information that matches the selected 13090 or 13100. Never drill tempered glass and never scale an installation dimension from a product photograph.
Cleaning and ongoing maintenance
The 13000 Series buyers guide notes that the enclosed Aqua panels and clear glass surfaces avoid the grout lines found in a conventional tiled shower enclosure, reducing grout-maintenance work. Routine cleaning is still required. Use products and methods suitable for acrylic, powder-coated aluminium, plumbing finishes and safety glass.
The spring-loaded quick-release bottom door rollers help provide cleaning access around the lower door area. Keep tracks, rollers, wastes and shower outlets free of build-up, and use genuine model-specific parts when replacement is required. Identify the shower series, size and component position when contacting Aeros.
Five cartons and two-pallet freight arrangement
The 13000 Aqua Series shower cubicle is packed into five cartons: the shower tray carton with accessories inside, side-wall carton, rear-walls carton, middle-panel carton and door carton.
The 13000 Series buyers guide separates the two pallet arrangements so customers can plan delivery and unloading accurately. The glass cartons are always grouped on Pallet 1. The shower tray carton and its packed accessories are on Pallet 2. The complete unboxed product weight is approximately 100 kg. General packaged weight is approximately 110 kg, while the size-specific pallet totals below are the correct figures for freight planning.
Freight / Pallet sizes
| Model | Pallet | Contents | Dimensions | Freight weight |
|---|---|---|---|---|
| 13090 | Pallet 1 — glass | Side-wall carton; rear-wall carton; middle-panel carton; door carton | 195 × 95 × 30 cm | 70 kg |
| 13090 | Pallet 2 — shower tray | Shower tray carton with accessories | 95 × 95 × 34 cm | 35 kg |
| 13100 | Pallet 1 — glass | Side-wall carton; rear-wall carton; middle-panel carton; door carton | 195 × 105 × 30 cm | 75 kg |
| 13100 | Pallet 2 — shower tray | Shower tray carton with accessories | 105 × 105 × 34 cm | 40 kg |
Delivery, unloading and storage
The 13000 Series buyers guide helps customers prepare for delivery by confirming that the carrier can access the address and that there is a safe, dry location for both pallets. Arrange enough capable assistance and suitable handling equipment for the glass and tray packages. Do not expect one person to manually handle complete pallets or large glass cartons.
Keep cartons upright where marked, protect them from impact and weather, and inspect the delivery before installation. Allow a clear route from the unloading point to the assembly area, including gates, paths, lifts, stairs, doorways and turning space. Report transport damage promptly in accordance with the current Aeros process.
13000 Aqua Series versus 3000 Aqua Series
| Feature | 13000 Aqua Series | 3000 Aqua Series |
|---|---|---|
| Layout | Square corner shower with front entry | Square front-entry basic model |
| Main control | WaterMark three-way mixer/diverter | Flick mixer |
| Rainfall-arm diverter | 2-way: rainfall shower head or hand shower | 2-way: rainfall shower head or hand shower |
| Waterfall spout | Included | Not included |
| Back jets | Four brass back jets | Not included |
| Storage | Two baskets plus two shampoo dispensers | One basket |
| Hand-shower rail part | Rail with adjustable soap dish and hand shower holder | Hand shower included |
Choose the 13000 Aqua Series shower cubicle when the deluxe water functions, storage and internal fittings justify the step up. Choose the 3000 when the same general square front-entry concept is preferred with a simpler basic shower package. Confirm current sizes, price, availability and exact product-page inclusions before ordering.
Assembly guides, warranty, genuine parts and support
Use the current assembly guide for the exact 13090 or 13100 model. Read it before final plumbing positions are fixed and keep it available during assembly. The 13000 Series buyers guide does not replace licensed plumbing work, the assembly instructions or site-specific compliance advice.
Current warranty conditions and registration requirements are available from Aeros. Genuine model-specific parts and customer support are also available. When requesting assistance, provide the 13000 Series name, model size, purchase details and the component position so the correct part or advice can be matched.
Frequently asked questions
Is the 13000 a corner-entry shower?
No. It is a square corner shower with front entry and a single internal sliding front door.
Are the internal plumbing hoses included?
Yes. Internal hoses connecting the supplied shower plumbing components are included, as is the hand-shower hose. Two mini stops and the external stainless-steel braided supply hoses connecting the premises’ water supply are required but not included.
How do the two diverters differ?
The 2-way diverter on the adjustable rainfall arm switches between the rainfall shower head and hand shower. The separate three-way mixer/diverter selects the rainfall shower arm, waterfall spout or back jets.
What sizes are available?
The 13090 is 900 × 900 mm externally. The 13100 is 1000 × 1000 mm externally.
What room height is required?
The minimum installation height is 2150 mm. The adjustable rainfall arm gives an approximate completed height of 2150–2290 mm, and additional working clearance may be needed.
Can the safety glass be drilled on site?
No. Tempered safety glass must never be drilled, cut or modified. All required holes are prepared before tempering during manufacture.
Is the enclosure silicone-free?
Yes, the Aeros clip-lock enclosure assembly is 100% silicone-free and uses no glue or screws. Plumbing connections remain separate and must use compliant methods and materials.
Can the shower be dismantled?
Yes. The clip-lock enclosure can be dismantled later if required, subject to safe disconnection and handling.
Choose your 13000 Aqua Series
Before ordering, use the 13000 Series buyers guide to confirm the external size, room height, front-door clearance, waste position, water-supply route, delivery access and the plumbing parts that must be supplied on site. The shop page contains current price, stock and size-selection controls.
If any measurement, connection or delivery detail is uncertain, contact Aeros before purchasing. Resolving it first can prevent ordering the wrong size and avoid installation delays.
Why choose an Aeros shower cubicle?
An Aeros fully enclosed shower cubicle combines the tray, wall panels, safety-glass enclosure and shower fittings in one coordinated package. Its watertight enclosed construction can reduce reliance on tiled wet-area work, avoid grout maintenance and make routine cleaning easier. The deluxe 13000 Aqua Series suits buyers wanting a square front-entry layout with multiple shower functions and practical internal storage, backed by Aeros shower experience in Australia since 2000.
13000 Aqua Series summary
The 13000 Aqua Series is the deluxe square front-entry option with a single internally sliding door, rainfall and hand showers, confirmed deluxe controls, four brass back jets, two baskets, two shampoo dispensers and an internal grab bar. Choose 900 × 900 or 1000 × 1000 after confirming the footprint, unobstructed front access, 2150 mm minimum installation height, plumbing and drainage preparation, and delivery access. Use the product link below to select the correct size.