13000 Aqua series shower cubicle

$1,385.00$1,455.00

Aeros 13000 Aqua series
Deluxe single sliding door corner square shower cubicle
Dimensions can be found in tabs below

  • Place your order before 9.30am for same day dispatch
Guaranteed Safe Checkout

Deluxe single door square shower cubicle
13000 Aqua series shower cubicle
$1,385.00$1,455.00
Call Back Form

13000 Aqua series shower cubicle

The deluxe 13000 Aqua series shower deluxe single sliding door square free-standing shower cubicle.

Assembly requires no silicon, glue, or screws.

The innovative click lock system ensures a completely watertight shower.

Deluxe single door square shower cubicle
13000 series
13000 series no front
13000 features

Features

  • WELS-approved hand shower & 20cm rainfall showerhead
  • Adjustable height rainfall shower arm 
  • Water spout, great for washing feet
  • Brass back jets
  • Australian approved Watermark mixer w/ BONUS Watermark approved hoses
  • Internal sliding door
  • Grab bar
  • Shampoo / Body wash dispensers
  • Hand shower rail with soap dish
  • Aluminum basket*2
  • ASNZS2208 Australian standard glass
  • Quick-release door rollers
  • Bonus wall mounts to stabilize the shower to the wall.
  • Non-slip shower base
  • Waste plug
  • Number of screws for frame assembly, “NONE”
  • Door handles
  • Magnetic door strip
  • *Not shown – front double sliding door square shower section included

Accessories

The accessories attach to the rear glass panels, holes are pre-drilled for your convenience.

The shower tray has multiple adjustable legs below to level the shower.

Designed with a lip around the top edge to stop any water from leaking onto the floor.

Rainfall shower arm
Rainfall shower arm, shower head, hand shower

Rainfall shower arm & shower heads

The rainfall shower arm is adjustable in height.

Height is variable from 2090mm up to 2290mm from the floor.

The shower arm holds the rainfall showerhead and 3-function hand shower, to select between the two there is a diverter at the bottom of the rail.

The shower arm, rainfall showerhead, and hand shower conform to Australian Watermark Standards and WELS compliance.

WELS registration: S14515, Flow rate: 9.0L/m, Star rating: 3

Adjustment wheel top
Top door rollers

Door rollers

High-quality stainless steel wheels.

Designed for easy cleaning and maintenance.

The bottom wheels have a spring to pull that will release them from the track.

Remove the door from the top track and clean and maintain wheels and tracks.

Quick release bottom wheel
Bottom door rollers

Mixer diverter

Our showers come with Australian standard Watermark-approved mixer diverters.

13000 aqua series shower tested and certified to meet ALL Australian requirements.

Easy access to cartridge for the mixer at the front of the handle, no need to remove shower to replace the cartridge.

Watermark approved Mixer divertor
Mixer diverter
Double aluminium baskets
Aluminum baskets

Double aluminum baskets

Included are 2 baskets to store your shampoo, conditioner, and soaps, made from aluminum so they will not rust.

Kids can’t reach the basket?

To set the baskets down low, reverse the wall.

Grab bar

Included is a grab bar, mainly used for steadying in the shower.

Grab bar
Grab bar
Shampoo dispensors
Shampoo dispensers

Shampoo dispensers

The bottles are easy to refill with any of your favorite products.

The bottles are easily refillable.

Slide bottles up from the mount, and lift the lid to fill with your favorite products.

Hand shower rail

There’s also a separate hand shower rail and soap dish.

Attached to the rail and can slide up or down.

Hand shower rail with soap dish
Hand shower rail
Brass back jets
Brass back jets

Brass back jets

Add a touch of class to your shower.

Multi-directional brass back jets provide a refreshing massage and healthy full-body hydration.

Select the feature from the diverter and adjust the pressure from the mixer handle.

Waterfall spout

With the waterfall spout located at the bottom of the rear middle panel, this shower provides an ultra-luxurious shower experience.

Wash your legs and feet with both hands, or rinse the soap off your dog after a bath.

Waterfall spout
Waterfall spout
Australian standard 50mm waste plug
Waste plug

Waste plug

We’ve included a Waste plug designed to be used in your showers.

It is easy to clean, compatible with all shower systems, and prevents leaks.

The horizontal outlet allows for easy connection to existing plumbing.

Have an existing hole in the floor? the waste plug supplied can easily attach or go through a wall if required.

You can also rotate the waste plug. The waste pipe does not go through a bearer under the house

You attach the waste plug with a screw from inside the shower. There is no need to get underneath to tighten a lock nut.

Setup guide for Aeros single door square models

Here you will find a basic guide on how to assemble our single door square shower series.

NOTE: this is for frame assembly only, assembly of parts and accessories can be found in it’s respective model page…

Assembly procedure for shower frame and base 

Aeros shower square model assembly Step 1

Step 1

Square single door shower model

Aeros shower square model assembly Step 2

Step 2

This model has the option to assemble the door on the right or left hand side of the shower

Aeros shower square model assembly Step 3

Step 3

Shower tray assembly.

Level the shower tray feet below the base and connect to your waste pipe.

Aeros shower square model assembly Step 4

Step 4

In this guide the shower will be assembled with the door on the right hand side

  • Place the bottom front door rail on the base where the front door will be located.
  • Raise the clear side wall onto the base and insert the slot at the bottom of the front of the side wall onto the block at the end of the bottom door rail

NOTE: If you assemble door on the left, reverse the assembly process in the guide

Aeros shower square model assembly Step 5

Step 5

Attach any accessories if the wall has them included

Lock the rear panel to the side wall and rotate until it locks into position

Bottom of rear wall aluminium will slide under the aluminium on the base to lock into position

Aeros shower square model assembly Step 6

Step 6

Attach accessories to the middle panel, connect to your water mains, test for leaks from the hoses

Lock the middle panel onto the rear wall and rotate until it locks into position

Aeros shower square model assembly Step 7

Step 7

Attach any accessories if the wall has them included

Lock the rear wall panel onto the middle panel and rotate until it locks into position

Bottom of rear walls will slide under the rails on the base to lock both into position

Aeros shower square model assembly Step 8

Step 8

Attach the front aluminium vertical rail to the rear wall and rotate until it locks into position.

Slide the front aluminium down the the rear wall and slide it over the bottom door rail block

Aeros shower square model assembly Step 9

Step 9

Slide the top door rail over the front aluminum vertical rail and the side wall into the slots to lock into position

Frame is now assembled.

Aeros shower square model assembly Step 10

Step 10

Attach the door handles to the door, wide side will be on the inside, narrow side will be outside.

Aeros shower square model assembly Step 11

Step 11

When attaching wheels on the door check that you have the top of the door in relation to your door entry.

Check by matching the magnetic strip on the door will match the magnetic strip on the frame.

  • Top wheels are your level adjustment wheels
  • Bottom wheels are spring loaded to insert in the bottom door rail

NOTE: When screwing wheels into door frame, we suggest using Loctite to insure the bolts do not come loose over time.

Aeros shower square model assembly Step 12

Step 12

Once you have determined the top and bottom of the door and attached the wheels and adding Loctite you can hang the door on the shower frame.

One top wheel on the front door rail and one top wheel on the side wall.

The bottom wheels will be inserted in the bottom rails by pulling the spring down so it inserts into the bottom rails

If the door needs adjustment (raising or lowering the door) you rotate the knurled nut on the top wheel to raise and lower the door.

When you are happy with the height and level, lock the small grub screw (top wheels) so it does not come loose over time.

Aeros shower square model assembly Step 13

Step 13

Attach the the cover plate on the side wall by inserting as shown in Fig 1 & 2

Insert the rubber splash strip on the edge of the door as shown

The shower comes with optional wall mounts. To use them attach one edge to the side of the walls that are against you bathroom wall and the other edge to the bathroom wall.

Reviews

There are no reviews yet.

Only logged in customers who have purchased this product may leave a review.