14000 Aqua series shower cubicle

$1,385.00$1,455.00

Aeros 14000 Aqua series
Deluxe double sliding door corner round shower cubicle
Dimensions can be found in tabs below

  • Place your order before 9.30am for same day dispatch
Guaranteed Safe Checkout

Deluxe double sliding door corner square shower cubicle
14000 series

14000 Aqua series shower cubicle

The deluxe 14000 Aqua series shower deluxe double sliding door square free-standing shower cubicle.

Assembly requires no silicon, glue, or screws.

The innovative click lock system ensures a completely watertight shower.

Features

  • WELS-approved hand shower.
  • 20cm Rainfall showerhead.
  • Adjustable height rainfall shower arm.
  • Adjustable hand shower rail with bonus soap dish.
  • 4-way Australian approved Watermark mixer w/ BONUS Watermark approved hoses.
  • Double Aluminum baskets.
  • ASNZS2208 Glass.
  • Stainless steel door handles.
  • Grab bar.
  • Shampoo dispensers.
  • Water outlet, ideal for washing legs or feet only.
  • Waste plug.
  • Quick-release door rollers.
  • Bonus wall mounts to stabilize the shower to the wall.
  • Non-slip shower base.
  • *Not shown – front double sliding door square shower section included.
14000 series no front
14000 features

Accessories

The accessories attach to the rear glass panels, holes are pre-drilled for your convenience.

The shower tray has multiple adjustable legs below to level the shower.

Designed with a lip around the top edge to stop any water from leaking onto the floor.

Rainfall shower arm
Rainfall shower arm, shower head, hand shower

Rainfall shower arm & shower heads

The rainfall shower arm is adjustable in height.

It can be lowered to the height of the frame (2090mm) or raised to its maximum height (2290mm) from the floor.

The shower arm holds the rainfall showerhead and 3-function hand shower, to select between the two there is a diverter at the bottom of the rail.

The shower arm, rainfall showerhead, and hand shower conform to Australian Watermark Standards and WELS compliance.

WELS registration: S14515, Flow rate: 9.0L/m, Star rating: 3

Push button top wheel
Top door rollers

Door rollers

High-quality stainless steel wheels.

Designed for easy cleaning and maintenance.

The bottom wheels have a button to press that will release them from the track.

Remove the door from the top track and clean and maintain wheels and tracks.

Push button bottom wheel
Bottom door rollers

Mixer diverter

Our showers come with Australian standard Watermark-approved mixer diverters.

14000 aqua series shower tested and certified to meet ALL Australian requirements.

Easy access to cartridge for the mixer at the front of the handle, no need to remove shower to replace the cartridge.

Watermark approved Mixer divertor
Mixer diverter
Double aluminium baskets
Aluminum baskets

Double aluminum baskets

Included are 2 baskets to store your shampoo, conditioner, and soaps, made from aluminum so it will not rust.

Kids can’t reach the basket?

To set the baskets down low, reverse the wall.

Grab bar

Included is a grab bar, mainly used for steadying in the shower.

Grab bar
Grab bar
Shampoo dispensors
Shampoo dispensers

Shampoo dispensers

Two refillable bottles are included for shampoo, body wash, and conditioner.

The bottles are easily refillable.

Slide bottles up from the mount, and lift the lid to fill with your favorite products.

Hand shower rail

There’s also a separate hand shower rail and soap dish.

Attached to the rail and can slide up or down.

Hand shower rail with soap dish
Hand shower rail
Brass back jets
Brass back jets

Brass back jets

Four brass multi-directional brass back jets are included in this model.

Select the feature from the diverter and adjust the pressure from the mixer handle.

Waterfall spout

The waterfall spout is located at the bottom of the rear middle panel, a great addition to the shower.

Wash your legs and feet with both hands, or rinse the soap off your dog after a bath.

Waterfall spout
Waterfall spout
Australian standard 50mm waste plug
Waste plug

Waste plug

A Waste plug has been included, it has been designed to be used in our showers.

The horizontal outlet allows for easy connection to existing plumbing.

Have an existing hole in the floor? the waste plug supplied can easily attach or go through a wall if required.

You can also rotate the waste plug. The waste pipe does not go through a bearer under the house.

You attach the waste plug with a screw from inside the shower. There is no need to get underneath to tighten a lock nut.

Setup guide for Aeros double door square models

Here you will find a basic guide on how to assemble our double sliding door shower series.

NOTE: this is for frame assembly only, assembly of parts and accessories can be found in it’s respective model page…

Assembly procedure for shower frame and base 

Aeros shower double door square model assembly Step 1

Step 1

Square double sliding door shower model

Aeros shower double door square model assembly Step 2

Step 2

Shower tray assembly
Level tray feet below the base and connect waste pipe to waste plug provided

Aeros shower double door square model assembly Step 3

Step 3

Attach accessories to rear panel and connect water supply hoses to your water mains

Aeros shower double door square model assembly Step 4

Step 4

Lock the side rear wall to the middle panel

Bottom of wall aluminium will slide under the aluminium the base to lock into position

Attach any accessories if the wall has them included

Aeros shower double door square model assembly Step 5

Step 5

Repeat the previous step for 2nd side rear wall

Aeros shower double door square model assembly Step 6

Step 6

Place 2 of the door rails at the front of the shower tray as shown in image.

Aeros shower double door square model assembly Step 7

Step 7

Lock the Front fixed glass to the rear side wall and rotate.

Slide the rear side wall down so the cut out slides over the block on the door rail

Aeros shower double door square model assembly Step 8

Step 8

Slide the top rails so the blocks slide into the slots of the front fixed glass aluminium

Aeros shower double door square model assembly Step 9

Step 9

Attach the door rail connector blocks in the middle where the door rails meet, need to do both top and bottom door rails

Aeros shower double door square model assembly Step 10

Step 10

Slide the locking blocks on each corner of the rails to lock the rails.

Aeros shower double door square model assembly Step 11

Step 11

The top wheels are for adjusting the level of the door

Attach the magnetic door strips and cut to length

Attach the door handle

The bottom wheels have the push button for quick release mechanism

Aeros shower double door square model assembly Step 12

Step 12

  1. Hang the top wheels on the top curved rail
  2. Insert the bottom wheels into the bottom curved rail by pushing buttons
  3. If the bottom wheels do not spring back up into curved rail, or door is not level, adjust top wheel from the screw below the wheel
Aeros shower double door square model assembly Step 13

Step 13

Attach water splash strips to front fixed glass and inside section of door.
Cut any excess splash strip

Aeros shower double door square model assembly Step 14

Step 14

OPTIONAL

Place wall mounts against the edge of the shower

Cut any excess profile protruding from the top

Aeros shower double door square model assembly Step 15

Step 15

Mark the hole positions on the wall for drilling holes

Aeros shower double door square model assembly Step 16

Step 16

Insert screw anchors into wall

Aeros shower double door square model assembly Step 17

Step 17

Attach the wall mount to the frame

Screw into wall anchors to support the wall mounts

Reviews

There are no reviews yet.

Only logged in customers who have purchased this product may leave a review.